Description
IS420UCSBH1A GE
IS420UCSBH1A GE
IS420UCSBH1A GE
提供 SMC-50软启动器编程和操作所需的信息。SMC-50 软启动器是一种降压软启动器，其采用技术最先进的微处理器控制模块。
• 提供内部旁路或固态控制
• 带内部旁路的设备的电流范围为 108…480 A ；固态设备的电流范围为 90…520 A
• 额定电压：200…690 VAC
• 九种标准启动模式
• 三个扩展端口，供安装选件模块
• 内置电子式电机过载保护
• 每相均提供电流和电压检测
• 测量
• DPI 通信协议
• 参数配置选件
• 节能模式
• 记录最近的 100 个事件 ( 含时间戳)
• 网络通信 ( 可选)
• 外部旁路 ( 可选)
• 敷形涂覆 PCB
通过使用六个背靠背式可控硅整流器 (SCR) ( 每相两个)，SMC-50 软启动器为标准三相鼠笼式感应或星形— 三角形(6 线) 电机提供可控的加速、运行和减速调节。电源结构中可包含也可不包含 ( 固态) 一体式旁路接触器。
of industrial “system can
Connect 4960 fieldbus devices (10000 i/0).
Fi820f: two serial interfaces are provided to connect the serial protocol equipment. The maximum transmission rate is 38.4kbd and can be configured. Its Standards Association
Modbus Different physical interfaces can be selected for different connection schemes, RS422, RS485, RS232. All interfaces are electrical isolation
Away. And the redundant operation is realized by two redundant field controllers.
Fi8i0f card is a triple can bus protocol interface card (rate 1mbd) used to connect industrial ial “conventional process control station
The i/0 protection unit of the PS is used to receive process signals from the rack mounted i/0 modules supported by the PS. Each field controller PS can only be configured
-Block fi810f card. — The two fi810f interface cards on the redundant PS. can be switched redundantly.
S800 and S900 are distributed i/0 for process control stations. They communicate with their controllers through Prof ibusdp Fieldbus
Communication, which can be installed in the controland PA three levels, DP communication rate can be as high as 12Mb. The CAN (DIN/IS011898 standard) bus
The biggest feature is its super sturdiness and data security. The system of course also supports Modbus. The communication with the intelligent field instrument is through
IART protocol or field bus (31. 25Kb ProfibusPA and FF bus).
The system communication between the operation management level and the
