Description
IS220PDIAH1A 336A4940CSP1 GE
IS220PDIAH1A 336A4940CSP1 GE
IS220PDIAH1A 336A4940CSP1 GE
Bulletin 150-SMC-50 智能电机控制器
SMC-50 智能电机控制器可为标准三相鼠笼式感应电机或星角(六引线) 电机
提供由微处理器控制的固态(SCR，无旁路) 启动。?
·90…520 A范围
·九种标准启动模式
·额定电压：200…690 V AC
·三个扩展端口，用于安装可选模块
·全固态，连续SCR控制
·内置电子式电机过载保护
·每相电流和电压检测
·测量
·DPI通信协议
·参数配置选件
·节能模式
·记录最近的100 个事件(含时间戳)
·网络通信(可选)
·可选外部旁路
·敷形涂覆PCB
configuration window for these devices.
●Profibus field controller can be integrated through FDT/DTM technology
line equipment
system structure
The Freelance 800F process control system is divided into operator levels
and process control level. The operator level contains controls for operation and display.
Archiving and logging, trending and alarming functions. Controller executes open loop
and closed loop control function.
Freelance 800F DigiVis Operator Level
DigiVis operator stations use PC hardware, either standard commercial
Business PCs can also be industrial-grade PCs and run on Micro-
under soft Windows operating system. DigiVis supports dual-screen display operation
operating technology, that is to say, two operations can be performed using one PC
station and operate with a mouse and a keyboard.
Operator level can install one engineering station and several operators
stand. ControlBuilderF engineering station configures and adjusts the system
Mode. Usually, we can use portable devices such as notebooks to
The system is now configured in the office and on site. Operator-level PC
Can also be used as an engineer station. Engineer standing during system uptime
Intervals can be closed without a permanent connection to the system.
Freelance 800F Process Control Stage
At the process control level, the Freelance 800F system can be controlled by
It consists of a number of process control stations connected to I/O units. you can choose this
Some process stations are in redundant mode (CPU redundancy, fieldbus module redundancy
redundant) or non-redundant mode. Modular pluggable input/output modules
Blocks are freely selected and used according to the type and number of system process signals.
AC800F controller connects remote I/O or field device via fieldbus
ready.
system communication
Communication between operator level and process control level using TCP/IP
Protocol system bus (based on Ethernet), you can choose different
transmission medium such as AUI, twisted pair, fiber optic or coaxial cable.
Freelance OPC server for connecting to higher-level
