Description
IS215UCVEH2AE GE
IS215UCVEH2AE GE
IS215UCVEH2AE GE
功率范围：200-1500 kW (250-2000 Hp)
以下步骤将引导规划和安装 PowerFlex 755 IP00、NEMA/UL 开放型
变频器。
1. 需考虑因素
·变频器规格 (Hp 和 VAC)，所需的附件/ 选件 ( 人机面板、通讯等)
·系统的进入防护
·变频器的安装方向
·冷却方式、通风方向、通风对准
·控制盒安装位置
·电缆进线/ 出线方案和电缆布线规定
·需要自卸推车
·人身安全和所需工具
2. 选择
·选择和购买配有子面板和进入防护附件的机柜
·选择和购买变频器和相应的变频器选件
·选择和购买控制盒和相应电缆
·选择和购买现场终结器套件
·选择和购买相关安装套件 ( 变频器安装和接地 )
·选择和购买柜门风扇
·选择和购买所需的电线和电缆
3. 机柜准备工作
·开通风口、安装柜门风扇
·附件规定 ( 人机面板支架等)
·制作和安装天花板隔层入口和出口电缆
·子面板钻孔
·安装现场终结器套件、安装支架和接地套件
·安装用户指定的附件
·远程安装控制盒
·安装子面板
4. 电源和接地接线
·确保接地正确
·放置和固定可拆卸的 L 形支架
·可靠端接电源电缆
·连接电源电缆
5. 推入并固定变频器单元
·将变频器单元拉到垂直位置
·放置自卸推车
·将变频器单元放在小车上
·将变频器单元放到机柜中并固定
6. 控制接线
·将控制盒安装到变频器中
·确认控制变压器电压
·确保电缆布线正确
·连接控制盒电源电缆和光纤电缆
·安装实时时钟电池和 HIM 电缆
·安装其他控制接线
·确认紧固件与连接器的紧固扭矩均正确
7. 调试系统
identification with production operating parameters
c
Complete self diagnosis
Compact and rugged design
Front panel wiring
DIN rail (U-shaped) mounting well can be directly installed on the wall, which is simple and convenient
o
Allowable operating ambient temperature 60 C, automatic temperature monitoring
o
EMC (electromagnetic compatibility) conforms to en50082 standard
mouth
Certification: CE, Namur, CSA, csa-nrtl, FM class 1 div2, ghost, Lloyd
Installation area: Class 1 div 2
The PS supports the following types of fieldbus standards:
Profibus DP，up to 12 MBd
Modbus RTU，1200 to 38. 4KBd
Industrial” CAN I/0 Bus
o
Open CAN -Bus，up to 1 MBd
o
Foundation Fieldbus H1
up to 31. 25KBd
Foundation Fieldbus H2 (fast Ethernet)
HART
The system allows different types of field buses to be mixed and run simultaneously in the same field controller PS.
Industrial “field control explosion (AC800F) consists of the following components:
Basic unit pm802f
Power supply sa801f/sd802f
o
Ethernet network card ei801f/ei802f/ei803f
o
Fieldbus interface card fi810f/fi820f/fi830f
Various accessories
The main components of the field controller PS are described below.
Basic unit pm802f
The basic unit pm802f is composed of a metal rack and a CPU motherboard. It periodically scans the data from the
The signals of the field bus sensors are processed according to the control application program configured by the user, and then the calculation results are
