Description
GE IS210AEDBH4AGD
GE IS210AEDBH4AGD
GE IS210AEDBH4AGD
介绍了关于 FPBA-01 PROFIBUS DP 适配器模块的配线、配置和使用方面的信息。
FPBA-01 PROFIBUS-DP适配器模块是ABB传动单元的一个可选设备，它可以将传动单元连接到一个PROFIBUS 网络。在PROFIBUS 网络上，传动单元被认为是从设备。通过FPBA-01 PROFIBUS-DP 适配器模块，可以：
• 向传动单元发出控制命令 ( 启动、停止、允许运行等等)。
• 向传动单元发送速度或转矩给定信号。
• 向传动单元的PID 调节器发送一个过程实际值或一个过程给定信号。
• 从传动单元中读取状态信号和实际值。
• 改变传动参数值。
• 对传动单元进行故障复位。
E
high reliability, strict industrial application practice, more than 1000 sets of application performance in China;
4. It has good openness, flexibility and scalability;
Fifth, the project is easy, the interface is friendly, and the maintenance is simple;
2. Industria1″ system communication
Industrial” system uses international standard industrial bus. Field controller supports Profibus, FF, ModBus, Can, etc.
International standard fieldbus, Profibus is the most widely used open fieldbus international standard in the world, divided into FMS, DP and PA
Level 3, DP communication rate can be as high as 12Mb. Profibus is used to connect intelligent devices such as distributed I/0 stations and field bus instruments.
Communication between the process station, operator station and engineering station takes place via the system bus DigiNetS (Industrial Ethernet). user
Different transmission media (RJ45 twisted pair, thin, thick or fiber optic cables and mixed media) and network topology can be selected for the system bus.
Simple layout, due to the use of TCP/IP protocol, the system can also use the public telephone network (dial-up mode) or satellite to achieve ultra-long-distance communication.
Subsystems such as PLC communicate with the Industrial” system through the ModBus protocol interface. The system also supports IEC870-5 over-control protocol.
discussion.
The Flash EPROM inside the PS provides more than 220 functional modules (control algorithm subroutines),
