ICS TRIPLEX T3480
ICS TRIPLEX T3480
ICS TRIPLEX T3480
适用于2.8x或更高版本的ACS880基本控制程序。
• 使用控制盘提供了控制盘的描述以及使用说明。
• 控制地和运行模式描述传动的控制地点和操作模式。
• 程序功能包含ACS880基本控制程序的功能介绍。
• 应用宏对每个宏进行简短介绍并提供连接图。宏是预定义的应用程序，当对传动进行配置时，该应用程序可节省用户的时间。
• 参数介绍传动的参数。
• 其它参数数据包括有关参数的详细信息。
• 故障跟踪列出警告和故障消息以及可能的原因及解决办法。
• 通过内置总线通讯接口控制 介绍使用内置现场总线接口与现场总线网络之间的通讯。
• 通过总线适配器控制 介绍使用可选总线适配器模块与现场总线网络之间的通讯。
• 控制链图介绍了传动内的参数结构。
configuration and debugging of process level, operation level and even fieldbus instruments, and uses the same
a global database.
The scale of the system is highly scalable, and a single-system supports 1 to a maximum of 100 control stations and 100 operating stations. each control
The station can support several thousand I/0 points at most, and the scale of the whole system can be expanded. The hardware of the system control station is encapsulated in an all-metal shell, which can withstand the most
Harsh industrial environment. The device can be installed either in a cabinet or on a wall. System complies with all current EMC standards and is CE marked
Chi.
Industrial” DCS system design purpose: the most economical engineering investment, the most powerful control function.
Five features of Industria1″ DCS system:
1. All-round integrated control system, integrating DCS & PLC & Field Bus;
2. Using RISC SuperScalar high-speed CPU, with super performance;
Three high reliability, strict industrial application practice, more than 1000 sets of application performance in China;
4. It has good openness, flexibility and scalability;
Fifth, the project is easy, the interface is friendly, and the maintenance is simple;
2. Industria1″ system communication
Industrial” system uses international standard industrial bus. Field controller supports Profibus, FF, ModBus, Can, etc.
International standard fieldbus, Profibus is the most widely used open fieldbus international standard in the world, divided into FMS, DP and PA
Level 3, DP communication rate can be as high as 12Mb. Profibus is used to connect intelligent devices such as distributed I/0 stations and field bus instruments.
Communication between the process station, operator station and engineering station takes place via the system bus DigiNetS (Industrial Ethernet). user
Different transmission media (RJ45 twisted pair, thin, thick or fiber optic cables and mixed media) and network topology can be selected for the system bus.
Simple layout, due to the use of TCP/IP protocol, the system can also use the public telephone network (dial-up mode) or satellite to achieve ultra-long-distance communication.
Subsystems such as PLC communicate with the
