1747-L553 A AB
1747-L553 A AB
1747-L553 A AB
Logix5000控制器常用过程编程手册（中文）
1756 ControlLogix®,
1769 CompactLogix™,
1789 SoftLogix™,
1794 FlexLogix™,
PowerFlex 700S with DriveLogix
本手册指导为 Logix5000™ 控制器开发项目。它提供有关如何执行以下任务的逐步过程，这些过程对所有 Logix5000 控制器通用：
• 组织任务、程序和例程
• 组织标记
• 设计顺序流程图
• 使用梯形逻辑、功能块图、流程图或结构化文本编程语言编写例程
• 与其他控制器通信
• 通信和处理 ASCII 信息
• 处理故障
wire. Because the position of mobile phone or network terminal is not fixed, so the traditional data acquisition method is not suitable, so the PLC control system needs to add a network data acquisition module. WEBGUI is the use of a large control GRM series remote control module
European 690+ series Inverter (B, C, D, E, F specifications) product installation manual (Chinese)
Type C, D, E and F 650V converters are part of the 650 series AC converters designed for speed control of standard three-phase induction motors. In its rated range can be used for heavy duty and normal torque drive and pump and fan control.
· The device can be remotely controlled using definable analog and digital inputs and outputs without the need for option devices.
· Local control of the device using the 6521 (or 6901) can read parameters, diagnostic information, protection set points and full application programming. Other features are available, such as advanced sensorless vector control configurations for high torque and low speed operation; Optional switching frequency and unique quiet mode control system to minimize motor noise.
With selectable external radio frequency interference (RFI), the filter enhances electrical compatibility (EMC).
650 series AC frequency converters are suitable for three-phase AC motors and provide simple, smooth speed control with power ranges from 0.2KW to 110KW. The 650 has a variety of practical features built in, including a variety of application macro software function modules, complete EMC filters, and control panel options that can be installed locally or remotely. All of these designs simplify installation, operation, and parameter Settings.
· Large torque sensorless vector control mode is optional
· Multiple application macro program modules are optional
EMC filter,
· Control panel/programmer with remote installation options
·DIN rail installation (for up to 7.5KW) or flange direct panel installation
· Flexible I/O Settings including analog, relay outputs and motor temperature sensor inputs
· Constant torque/variable torque power selection
·
