5SHY3545L0009
5SHY3545L0009
5SHY3545L0009
包含用户操作、维护MV SMC—Flex家族控制器以及对这类控制器进行故障排除的材料。该家族包括了下列Bulletin编号：1503E 1560E和1562E。适用于K系列或更新版本，固件版本4．XXX(或更新)的组件。
MV SMC-Flex是固态三相交流控制器。它可以提供标准三相鼠笼感应电机的微处理器控制的起动和停止，使用与Allen-Bradley Bulletin 150 SMC-Flex相同的控制模块。
1503E-OEM控制器
这是一种框架安装的中压固态控制器，它可以安装在OEM或用户提供的框架上，可以与现有的或OEM/用户提供的起动器一起工作。它由下列几个模块化部件组成，包括：
·框架安装或不固定的电源组，包括门极驱动板
·不固定的接口和电压反馈板
·供触发SCR的光纤电缆
·基于微处理器的控制模块
·旁路真空接触器
with RTX real-time extension. It can be programmed through Step 7 and the code is fully compatible with S7-300/400, or it can be programmed to communicate with WinAC under Windows using the high-level language C++ through the interface provided by WinAC ODK. Therefore, WinAC RTX has both the real-time performance of PLC and the openness of PC.
Run Windows Automation center Real-time (WinAC RTX) on a Windows NT 4.0 PC. WinAC RTX provides real-time control services for your automation applications. The WinAC RTX software includes the following products:
· Windows Logic Controllen (WinLC) RTX software
· VenturnCom Real-time Extension (RTX) software for Windows NT
·Computing software
·Tool Manager (Tool Manager)
This paper introduces how to use SIMATIC IPC IMAGINE&PARTITION CREATOR V3.1 software to transfer the Windows system partition from a small-capacity CF card used by Microbox to a larger capacity CF card, so as to have more space for software installation or data storage.
1 Local Connection
2 CP5611 NIC using MPI protocol
3 CP5613 NIC using Profibus-DP protocol
4 3com network adapter, TCP/IP protocol describes the EC31-RTX installation and use of the detailed steps and precautions.
EC31-RTX is a modular embedded controller designed according to the S7-300 specification. Windows XP Embedded SP2 Feature Pack 2007,WinCC RTX 2008 SP1, and SIMATIC NET 2008 SP2(SIMATIC NET IE Softnet S7-Lean) have been preinstalled before delivery Edition 2008) and is configured to be used when the user connects to the power supply.
EC31-RTX is equivalent in function to a S7-300 PLC and a PC with SIMATIC NET 2008 installed. The hardware and software components of Windows Automation Center (WinAC) allow the user to set up a data center on a PC
A combined solution of management, control, visualization and communication (PC-BASED control). The following versions of WinAC products are
