1756-IF16A AB
1756-IF16A AB
1756-IF16A AB
XM 1440-TBS-J 底座与 XM动态测量模块1440-DYN02-01RJ配套使用。1440-DYN02-01RJ 动态模块专为与Allen-Bradley ControlLogix 控制器进行集成而设计。通过 1440-ACNR ControlNet 适配器连接，并由罗克韦尔 RSLogix5000 软件通过控制器执行组态。
动态测量模块是智能型双通道通用监测模块，可插入 XM“J”型底座。
function expansion, convenient maintenance (replace the module), easy to judge the fault, etc., to choose the PLC structure form according to the actual need. Assigning input/output points Generally there is a one-to-one correspondence between input points and input signals, and output points and output controls. After allocation, according to the channel and contact number configured by the system, assign each input signal and output signal, that is, number. In some cases, there are two signals with one input point, so the input point should be connected in a logical relationship before the input point (such as two contacts in series or parallel), and then connected to the input point. (1) Determine the I/O channel range of different models of PLC, the range of the input/output channel is not the same, should be according to the selected PLC model, consult the corresponding programming manual, never “Zhang Li Di Di”. You must refer to the relevant operation manual. (2) Internal auxiliary relays do not output externally and cannot be directly connected to external devices, but are used for data storage or data processing when controlling other relays, timers/counters.
1C31 series DCS system, CPU, OVATION system, WDPF system,
WEStation System spare parts.
: Redundant fault-tolerant control system, modern fault-tolerant controller based on Triple module redundancy (TMR) structure.
EMERSON: Spare parts for modules, cards, drives, etc.
XYCOM: XVME series
Bently (Bentley) : 3500/3300 system.
Rockwell: ICS systems.
ABB: PM full series DCS sy
