3L046-5 KPC CG
3L046-5 KPC CG
3L046-5 KPC CG
WinCC、WinAC与S7-300/400之间以太网通讯的方法指南（中文）
WinAC和WinCC可以用同一块普通以太网卡和S7-300/400进行工业以太网通讯。因为WinAC是基于PC Station的，所以WinCC也需要用PC Station的形式来集成组态。
必备条件
1、硬件
• S7-300/400 CPU和CP343-1/CP443-1
• 普通以太网卡/CP1613
• CP5611/CP5613
2、软件
• Step7 V5.3/V5.4
• WinAC RTX V4.1/2005
• SIMATIC Net 2003/2005/2006
• WinCC V6.0/6.2
采用了Step7 V5.4 SP3.1，WinAC RTX 2005(4.2) SP1 HF3，Simatic Net 2006(V6.4)和WinCC V6.2 SP2。
design purpose: the most economical engineering investment and the most powerful control function.
Industria1 “five features of DCS system:
1、 The comprehensive control system integrates DCS & PLC & field bus;
2、 RISC superscalar high-speed CPU with super performance;
3. High reliability, strict industrial application practice, and application performance of more than 1000 
sets in China;
4、 Good openness, flexibility and expansibility;
5、 Easy engineering, friendly interface and simple maintenance;
2. Industria1 “system communication
Industrial ial “the system uses the international standard industrial bus. The field controller supports PROFIBUS, FF, MODBUS, can and other countries
International standard fieldbus, PROFIBUS is the most widely used open fieldbus international standard in the world, which is divided into FMS, DP and pa
Level III, DP communication rate can be up to 12MB. PROFIBUS is used to connect distributed i/0 stations, field bus instruments
