WATLOW ANAFAZE CLS208
WATLOW ANAFAZE CLS208
WATLOW ANAFAZE CLS208
PM-E 24 VDC 功率模块 (6ES7138-4CA01-0AA0)属性
• PM-E 24 VDC 功率模块监视电压组中所有电子模块的电源电压。 电源电压通过 TM-P终端模块提供。
• 您可以使用 PM-E 24 VDC 功率模块电压组中除 2DI 120 VAC ST、2DI 230 VAC ST和 2DO 24-230 VAC/1 A 之外的所有电子模块。
• 功率模块的当前状态存储在过程输入映像（PII）的状态字节中。
无论是否启用了“空载电压”诊断，均会对其进行更新。
• PM-E 24 VDC 功率模块适用于故障安全模块。
• 使用垂直安装时温度范围可扩展为 0 到 55°C
ratio, Simith, etc.) and high-speed logic control
Control, sequence control and batch intermittent control functions.
The internal communication of the process control station (between the controller and various intelligent devices such as i/0 or field instruments) adopts the in
ternational standard field general
Line. The field controller supports various field buses such as PROFIBUS, which is the most widely used open field bus in the world
Line international standard, divided into FMS, DP and PA, DP communication rate can be as high as 12MB. Can (din/is011898 standard) bus
The biggest feature is its super robustness and data security. The system also supports MODBUS. The communication with intelligent field instruments is through
IART protocol or fieldbus (31.25kb profibuspa and FF Bus).
The system communication between the operation management level and the process control level is realize
by the di ginets network (Industrial Ethernet /iee802.3 standard),
The user can select the communication transmission medium (ordinary cable or optical fiber) and network topology structure according to the actual situation of the application.
Popular PC and MS_ Wi ndows2000 has been widely used in various fields all over
