IC697CMM742 GE
IC697CMM742 GE
IC697CMM742 GE
ISC40□J传感器是为与ISC202G/ISC200S两线制变送器和ISC402G四线制转换器一起使用而设计。该组合在电导率测量的可靠性、精度、可调范围和性价比方面超出所有期望。
对任何电导率值，精度为读数的0. 5%+0. 5uS/cm:无论是在漂洗水或在浓缩酸中测量。构造材料确保了在恶劣的工业条件下长期使用。
耐腐蚀／磨损的PEEK（聚醚醚酮），其特点是在除氢氟酸或氧化浓酸外的所有溶液中具有优秀的耐化学品性能。
PEEK传感器随刚性的不锈钢安装螺纹／螺帽／衬垫组合提供，在安装中使用隔板安装技术，安装灵活。同样，范围宽广的支架及用双O形圈密封的在线或离线可靠安装的有效选项，延长了传感器的使用寿命。
ISC40□J的孔径大，耐过程污垢性能最佳，正确安装时，流体流动将使传感器保持清洁，避免了测量误差。 DC402G电导率仪是为适应现代工业环境下对双电导池导率及电阻率测量精度的要求而进行专门设计，它包含有许多特点，可以确保最佳的测量精度。可指示和／或传送差、比率、偏差、变化率或除去率。
该四线制变送器装在一个可现场安装、坚固的、防护等级为IP65箱体内。仪器有两路mA输出，采用四个继电器，清晰的LCD，这些特点使DC402G成为一个完美的整体。
DC402G的特点是在PI控制下的辅助mA输出和脉冲比例继电器输出，这就避免了另外使用单独的控制装置。
著名的EXA传感器自诊断功能也适用于DC402G。仪器的温度补偿有很大的选择余地。仪器可以进行IEC746-3 NaCL补偿；根据手册作温度系数(TC)补偿；预编程的（线性）点阵补偿；和自由编程的5×5点阵线性补偿，提供了影响最小的高精度测量。
process point within the scope
noodle.
ABB is the world’s largest in measurement and process automation
One of the equipment and system suppliers.
An important factor in maintaining this market position is the quality of our products
quantity, and quality from manufacture all the way to service. ABB automation early
In 1990, it obtained the DQS certificate based on ISO9001 certification,
EQnet quality based on ISO 9000/EN 29000 was subsequently achieved
Certification.
However, the Freelance 800F is more than technical excellence, I
We have also spent a lot of effort in proper planning, installation and revision too
This makes engineering design and maintenance faster, more economical and more efficient.
Industrial” is a world-leading all-round integrated open control system launched by ABB Group Automation Headquarters.
It integrates the advantages of traditional DCS and PLC in one body and supports a variety of international field bus standards. It has both the complex analog loop regulation capability of DCS
Power-friendly human-machine interface (HMI) and convenient engineering software, and at the same time have high-speed logic and sequence control equivalent to high-end PLC indicators.
control performance. The system can be connected to both conventional I/0 and various field bus devices such as Profibus, FF, CAN, and Modbus. system tool
It has a high degree of flexibility and excellent scalability, whether it is the control of small production units, or the control of ultra-large-sca
