ABB CI532V01 3BSE003826R1
ABB CI532V01 3BSE003826R1
ABB CI532V01 3BSE003826R1
NETA-01 以太网适配器模块是一个可选设备，它借助浏览器通过以太网对 ABB变频器进行远程监控。可以通过 DDCS 分支单元（NDBU-85/95）或使用环形拓扑结构将多个变频器（最多9 个）连接到网络。借助 NETA-01 以太网适配器模块，可以实现以下功能：
• 监控变频器
– 读取和调整变频器参数值
– 从变频器读取状态信息和实际值
– 设置和监控（通过数字或图形方式）数据记录器并将其内容保存在文件中
– 读取和清除故障日志的内容，并将其保存到文件中
– 发送关于事件的电子邮件消息（最多9 个）
– 通过电子邮件连续监控变频器
– 通过 Modbus TCP 服务器从变频器和过程采集数据
• 控制变频器
– 向变频器发送控制命令（启动、停止、允许运行…）
– 向变频器提供给定电机速度或力矩值
(WinAC) allow the user to set up a data center on a PC
A combined solution of
management, control, visualization and communication (PC-BASED control). The following
versions of WinAC products are available:
412 · WinAC Slot
416 · WinAC Slot
Pc-based 
control for WinAC Slot 412/WinAC 416
In the top line of PLC applications, the number of
PC tasks (such as data processing and visualization) has been increased. The use of
PC-based control (= using a PC with an integrated PLC) is a more common solution than
using standard PLC communication with a PC link. Pc-based control combines PLC with
data processing on a PC with WinAC Slot 412/WinAC Slot 416.
WinAC Slot/WinAC Slot 416
integrates open-loop control and closed-loop control automation tasks, data processing,
communication and visualization in a single PC. WinAC Slot/WinAC Slot 416 is based on
the original Windows NT and integrates into the office world using standard interfaces.
WinAC stands for Windows Automation Center.
WinAC Controlling with CPU 41x-2 PCI
WinAC
Controlling is the controlling component for WinAC Slot 412/WinAC Slot 416. WinAC
Controlling performs the tasks of a traditional programmable logic controller and is
fully integrated into the PC. WinAC Controlling consists of either CPU 412-2 PCI or CPU
416-2 PCI. These cpus have the typical characteristics of PLC:
· Warm start (heavy
start) or exact full restart (using PC expansion circuit board) as required
· Critical
behavior with real-time response time
Real-time clock,
· Use battery backup data to
maintain power failure (use PS expansion circuit board)
· External mount memory for
storing PLC programs independent of PC hard disk
· Integrated MPI for connecting
programmers to achieve technical services, for programming or for networking with other
stations
· Integrated PROFIBUS-DP interface for I/O connection
In addition, there is an
interface to connect to PC applications.
Category: Siemens Information – Siemens WinAC –
Siemens WinAC information classification: Technical manual
Siemens WinAC MP 2008 Quick
Start (Chinese)
This paper introduces the concept and internal architecture of WinAC MP,
and introduces the installation and configuration process of WinAC MP 2008 software.
1.
What is WinAC MP
WinAC MP is a real-time soft PLC that realizes the function of S7
controller (S7-300) on multi-function panel MP177, MP277, MP377, and runs on Windows
CE. WinAC MP 2008 is the current latest version of WinAC MP (V4.1.1).
2. Application of
WinAC MP
WinAC MP makes multi-functional panel MP177, MP277, MP377 in addition to HMI function,
at the same time with PLC function. After installing the WinAC MP, the multi-function
panel can extend distributed I/O through its PROFIBUS interface or communicate with
other S7 devices (S7-200/300/400 PLC, HMI, PG, etc.).
Category: Siemens Information –
Siemens WinAC – Siemens WinAC information classification: Technical manual
Siemens WinAC
Product Overview (Chinese)
SIMATIC WinAC is the core component of PC-based control
developed by Siemens, which extends the control range of SIMATIC S7. WinAC is a
veritable control center, it will PLC control, data processing, communication,
