IS200EPSMG1A
IS200EPSMG1A
IS200EPSMG1A
·插拔式中间接口继电器（CR）
·开关电源（CP）
·模拟信号转换器（CC）接线端子（螺钉卡箍连接、直插弹簧连接、ADO绝缘移位连接）
·工业连接器（IPS）
·电流、电压传感器
·机器安全产品
断路器类产品
·空气断路器（Emax2 *、Emax）
·塑壳断路器（Tmax XT *、Tmax、Formula *）
转换开关
·双电源转换开关-PC级（OT_C、OTM_C、OTM_C_D）
·双电源自动转换开关-CB级（DPT、ATS）
开关类产品
·隔离开关（SwitchLine）
·隔离开关熔断器组（PowerLine、SlimLine）
·凸轮开关（OC）
·熔断器式隔离开关（方型）（EasyLine）
·熔断器式隔离开关（条型）（FastLine）
·熔断器式隔离开关（条型）（InLine）
·FuseLine熔断器
电气火灾监控系统
·电气火灾监控系统（EFPS）
箱壳类产品
·终端配电箱（ACM、ACP、BCP）
·三相配电箱（SDB）
·配电开关箱（LSB/FSB）
·SPM多功能控制箱
·动力配电及控制箱（MNS-E）
·多功能控制箱（Gemini *）
·工业接线箱（Junctionbox *）
controller 1:1 redundancy, and undisturbed switching between master and slave PS. Two on each PS
Ethernet network card, the second network card is used to connect the system network diginets), and the second network cards can be interconnected with each other to form a special
Redundant communication link (diginetr) to ensure information synchronization between master and slave PS. — However, the master PS fails, and the slave PS can quickly and undisturbed connect the replacement worker
Make. All inputs and outputs also support redundant operation.
The data communication between the field process controller PS. operating station 0s and the engineer station es is completed by the system network (diginets), which is inserted
The – Ethernet network card on the PS basic unit provides the interface between PS and diginets. ES. Hardware configuration and PS
The user program is downloaded to the PS CPU through diginets and the first network card. After the field bus interface card is newly installed or replaced, the required group
The status information will be automatically reloaded. The configuration results and real-time process data are stored in RAM, and ram is installed on the Ethernet network card or battery card
The backup battery can maintain the configuration content and data in case of power failure.
Basic unit pmbo2f characteristics:
mouth
Installation slots of 4 fieldbus interface cards
c
Installation slot of 2 Ethernet network cards
Support redundant operation of Fieldbus interface card
Support hot plug of Fieldbus interface card
Technical indicators of basic unit pib02f:
CPU :Intel 80960HT25/75
32-bit RISC superscalar processor with operation speed of 150 MIPS
4 MB FLASH-EPROM
EEPROM，serial， 16 Kbit
o
Ram 8 MB (with error check and correction function,
