IS200TCASH1ACB
IS200TCASH1ACB
IS200TCASH1ACB
TeSys U 电动机起动控制器包括：
■ 动力底座
2 种电流规格，0 -12 A 和0-32 A。
■ 控制单元
控制单元提供 3 种类型，根据电动机起动的不同需要进行选择。从最简单的保护升级到最复杂的起动－控制－保护全部功能，只需更换控制单元，无需增加元件和尺寸。施耐德Clario母排连接系统基于先进的设计理念，一改传统手工接线方式，极大地节省了人力和时间成本。安装时，只需将梳状母排插入配电元件，拧紧螺丝即完成了元件的供电。
与以往的梳状母排连接方式相比，Clario母排连接系统具有更灵活更自由的特点，不同极数的产品之间可实现自由拼装。1P，1P+N，2P，3P，3P+N的产品可以根据您的需要随意地混装。
Clario母排可以方便截短为不同长度，适用于各种尺寸的配电箱。而且Clario母排配电系统可以根据用户的不同要求，灵活选择三种接线方式。
Clario母排连接系统较传统的连接方式，有接触面积大，接触电阻小，有效减少温升的特点，这些特性为最终用户带来了全新高度的安全体验。同时梳状母排还有一定的大电流耐受能力，能将短路造成的设备损坏降至最低，有效减少后期的维修和保养费用。
Clario母排连接系统还提供了完备的防触电保护附件。端盖和梳齿保护罩保证备用梳齿的金属部分不被碰触。最大限度保证最终用户的安全。
Glossary
Process station:
This term is used to describe AC800F controllers (field controllers) and rack-mounted controllers. A process station can be designed to be redundant
configuration and non-redundant configuration.
AC800F :
This term is used to describe the AC800F Field Controller type of process station. A redundant process station consists of 2
AC800F controller.
Rack mounted process station:
This term is used to describe a rack-mounted type of process station. A redundant process station contains 2 rack-mounted CPUs.
This term is used to describe a single, non-redundant process station.
In the investment of modern automation system, due to the hardware equipment department
It only takes up less cost in the whole system, then write engineering applications
The cost of software becomes increasingly important. Generally speaking, a self
The engineering application software cost of the automation project accounts for about the entire project.
About 50%, it is not difficult to see that the migration of cost structure creates a lot of innovation for users.
Create an opportunity to optimize project investment, therefore, it is necessary to start from engineering programming
Think about lowering costs in the first place!
This is what we developed the Freelance 800F system for:
Keeping hardware prices consistent with those of programmable logic controllers
In this way, cost efficiency can be improved by reducing user engineering costs.
How the Freelance 800F process control system helps users reduce
Low engineering cost?
●By using a complete engineering tool (Control Builder
F) to configure the entire control system, including automation functions
function, operator interface display and logging, and configuration of the fieldbus.
equipment (PROFIBUS, FOUNDATION Fieldbus,
HART, etc.) and device parameter settings.
● Automatic generation of global data between the process control station and the operator station
According to communication.
For field devices, process control stations and operator stations, a unified global database is used for the entire control system, thereby reducing
cost and time investment in establishing data communication and interactive access.
And ensure the consistency of data throughout the system.
●Provide system-wide unified inspection of user applications, overriding
from process control stations, operator stations to intelligent field devices, including
Including the integrity and consistency check of the user program.
●The programming language strictly complies with the international standard of IEC61131-3, and has
There are high-performance graphics editing functions:
– Function Block Diagram (FBD)
-Ladder Diagram (LD)
– Instruction List (IL)
– Sequence
