GE IC695ETM001-EK
GE IC695ETM001-EK
GE IC695ETM001-EK
低压开关设备是发电设备、输电设备 (电缆、高架线路)、电能转换设备和负载 (例如电动机、电磁阀、启动器、加热、照明和空调等设备) 间的纽带。低压开关设备主要应用于公共系统和工厂。
SIVACON 低压开关设备是经济实用的通过型式试验的低压成套开关和控制设备 ，用于电力工程、化学、石油和重工业，也用于公共和私人建筑系统。
它有优越的实用性，并对人员和设备有高度的安全性。它可用于 6300A 以下的各级电网:
● 作为主开关板 (动力控制中心或主配电板)
● 作为马达控制中心
● 作为分配电板软起动器通过限制起动电流和起动转矩，能够可靠地防止起动过程中的机械冲击和电网压降。通过对可控硅导通角的控制，来降低电机起动电压，并在设定的起动时间内，将电机起动电压升高到额定电压。凭借这种电机电压的无阶跃控制，可以根据被驱机器的负载特性对电机进行调节，平缓加速机械设备，从而显著提高机械设备的运行性能，延长其使用寿命。总之：通过软起动/软停车，能够有效保护所连设备，确保生产运行平稳、可靠。
Glossary
Process station:
This term is used to describe AC800F controllers (field controllers) and rack-mounted controllers. A process station can be designed to be redundant
configuration and non-redundant configuration.
AC800F :
This term is used to describe the AC800F Field Controller type of process station. A redundant process station consists of 2
AC800F controller.
Rack mounted process station:
This term is used to describe a rack-mounted type of process station. A redundant process station contains 2 rack-mounted CPUs.
This term is used to describe a single, non-redundant process station.
In the investment of modern automation system, due to the hardware equipment department
It only takes up less cost in the whole system, then write engineering applications
The cost of software becomes increasingly important. Generally speaking, a self
The engineering application software cost of the automation project accounts for about the entire project.
About 50%, it is not difficult to see that the migration of cost structure creates a lot of innovation for users.
Create an opportunity to optimize project investment, therefore, it is necessary to start from engineering programming
Think about lowering costs in the first place!
This is what we developed the Freelance 800F system for:
Keeping hardware prices consistent with those of programmable logic controllers
In this way, cost efficiency can be improved by reducing user engineering costs.
How the Freelance 800F process control system helps users reduce
Low engineering cost?
●By using a complete engineering tool (Control Builder
F) to configure the entire control system, including automation functions
function, operator interface display and logging, and configuration of the fieldbus.
equipment (PROFIBUS, FOUNDATION Fieldbus,
HART, etc.) and device parameter settings.
● Automatic generation of global data between the process control station and the operator station
According to communication.
For field devices, process control stations and operator stations, a unified global database is used for the entire control system, thereby reducing
cost and time investment in establishing data communication and interactive access.
And ensure the consistency of data throughout the system.
●Provide system-wide unified inspection
