SCXI-1326
SCXI-1326
SCXI-1326
三菱电机人机界面仿真软件GT Simulator2操作手册（中文）对GOT用画面仿真GT Simulator2(以下简称GT Simulator2)的系统配置、画面构成、对话框的基本操作方法等进行说明。
GT Simulator2是使用GT Designer2编制的工程数据，在个人电脑上仿真GOT操作的一种产品。
在GT Simulator2中，可使用GT Designer、GT Designer2这二者的监视数据。通过在个人电脑上仿真GOT的操作，在没有GOT本体的情况下也可以进行监视数据的调试。此外，通过与GX Simulator配合使用可以进行画面调试，如果在同一台个人电脑上安装GX Simulator及GT Designer2，仅用一台个人电脑就可以进行从画面制作到画面调试的全过程操作。需要修改画面时，通过GT Designer2进行画面修改后，可以立即用GT Simulator2确认变更结果，因此可以大幅度地提高设计效率。
(Industrial Ethernet). user
Different transmission media (RJ45 twisted pair, thin, thick or fiber optic cables and mixed media) and network topology can be selected for the system bus.
Simple layout, due to the use of TCP/IP protocol, the system can also use the public telephone network (dial-up mode) or satellite to achieve ultra-long-distance communication.
Subsystems such as PLC communicate with the Industrial” system through the ModBus protocol interface. The system also supports IEC870-5 over-control protocol.
discussion.
The Flash EPROM inside the PS provides more than 220 functional modules (control algorithm subroutines), in addition to the basic ones specified in the IEC 61131 3 standard
In addition to this content, many powerful and rigorously tested function blocks from actual engineering applications have been expanded. any complex control
The scheme can be realized by the combination of these function blocks.
The function blocks provided by the system mainly include the following categories:
o
Analog processing
o
digital processing
loop regulation
Logical sequence control
c
logic operation
Monitoring function
Collection function.
c
arithmetic operations
c
TCP/IP protocol communication interface
Modbus protocol communication interface
1EC870-5 protocol communication interface (Telecontrol)
4.2 Field Controller PS
Industrial” field controller PS is a special process control station, which is embedded with field bus communication interface for users to use
Fieldbus technology offers very flexible options. Each PS allows to insert 4 fieldbus interface cards (the card type can be different),
Each card is connected to 1 field bus to collect process data and diagnostic information from
the bus, the interface card is easy to replace and plug and play
(Plug & Play), and can be plugged and unplugged.
The field controller PS has the following characteristics:
o
Flexible: supports all international standard open fieldbuses and can be mixed
Simultaneous connection of 4 high-speed fieldbuses (max. 12 MBd)
Simple engineering: configuration, commissioning and diagnostics using only the same tool CBF (Control Build F) software
mouth
Access to all information from the field including equipment management information
Global database of fieldbus devices, control levels and HMI (Human Machine Interface) usage systems
Module identification with production
