HIMA F4304 操作员提示览表
对于每个过程报警消息和开关动作消息均可组态相应的操作员提示。该提示可以通知操作员消息
出现的原因及为消除故障应采取的相应措施等内容。如果需要该提示还可为操作员提供更多的帮助。
操作员提示一览表显示列出了所组态的全部提示。同时可发出提示声音(如人声) .
记录
记录用于记录来自过程的事件.状态和顺序。记录文件可存贮在硬盘上，可在监视器上显示、通
过打印机输出或存储到软盘上以备将来评估。
另外记录文件可自动通过FTP协议发送到以太网上的任何节
点。可使用Industrial”系统的数据浏览软件Digi Browse观察
这些数据或转换成ASCII码文件。
Industrial”系统有以下记录类型:
信号顺序记录(SOE)
信号顺序记录用于记录各种事件，如过程和系统报警、开关动作消息、操作员干预和提示。组态
时可确定所要记录消息的优先级。
and several operators
stand. ControlBuilderF engineering station configures and adjusts the system
Mode. Usually, we can use portable devices such as notebooks to
The system is now configured in the office and on site. Operator-level PC
Can also be used as an engineer station. Engineer standing during system uptime
Intervals can be closed without a permanent connection to the system.
Freelance 800F Process Control Stage
At the process control level, the Freelance 800F system can be controlled by
It consists of a number of process control stations connected to I/O units. you can choose this
Some process stations are in redundant mode (CPU redundancy, fieldbus module redundancy
redundant) or non-redundant mode. Modular pluggable input/output modules
Blocks are freely selected and used according to the type and number of system process signals.
AC800F controller connects remote I/O or field device via fieldbus
ready.
system communication
Communication between operator level and process control level using TCP/IP
Protocol system bus (based on
