ALSTOM UT150
ALSTOM UT150
ALSTOM UT150
MG8G磁氧分析仪利用磁铁吸引氧气的特性，可用于测量氧气浓度。磁氧分析仪与氧化锆氧分析仪不同之处在于，后者不能测量易燃混合气体中的氧气浓度，而MG8G可测量易燃混合气体中的氧气浓度。
通过适当的采样系统，MG8G磁氧分析仪还可以用于高温或者高压等各种工艺条件下的氧气浓度测量。
MG8G磁氧分析仪的传感器具有全新的结构设计，其开发基础是磁通量与氧流量成正比的原理，这一原理是经过长期现场应用证明的。转换器基于微处理器，操作性强且可靠性高。
Business PCs can also be industrial-grade PCs and run on Micro-
under soft Windows operating system. DigiVis supports dual-screen display operation
operating technology, that is to say, two operations can be performed using one PC
station and operate with a mouse and a keyboard.
Operator level can install one engineering station and several operators
stand. ControlBuilderF engineering station configures and adjusts the system
Mode. Usually, we can use portable devices such as notebooks to
The system is now configured in the office and on site. Operator-level PC
Can also be used as an engineer station. Engineer standing during system uptime
Intervals can be closed without a permanent connection to the system.
Freelance 800F Process Control Stage
At the process control level, the Freelance 800F system can be controlled by
It consists of a number of process control stations connected to I/O units. you can choose this
Some process stations are in redundant mode (CPU redundancy, fieldbus module redundancy
redundant) or non-redundant mode. Modular pluggable input/output modules
Blocks are freely selected and used according to the type and number of system process signals.
AC800F controller connects remote I/O or field device via fieldbus
ready.
system communication
Communication between operator level and process control level using TCP/IP
