VT2000-52 REXROTH
VT2000-52 REXROTH
VT2000-52 REXROTH
WinCC V6.2技术文档——WinCC“SIMATIC TI Ethernet Layer 4”通道（中文）
用于通过ISO 传输协议连接SIMATIC TI505 自动化系统。
它们具有两个通道单元，都支持最大数量的CP 1613。这两个通道单元的功能相同。 它们的区别仅在于两个CP 1613 的逻辑设备名称。
逻辑设备名称可以通过通道单元的系统参数改变。 也可以在此设置ISO 传输协议的参数。
支持下列应用程序：
• 通道单元505-Ethernet (CP 1413-1)用于SIMATIC 工业以太网(如CP 1613)的通讯模块。
• 通道单元505-Ethernet (CP 1413-2)用于SIMATIC 工业以太网(如CP 1613)的通讯模块。
o
Ei801f provides 10base2 thin cable communication interface
Ei802f provides 10BASE5 thick cable connection (through AUI interface)
Ei803f provides 10Base-T twisted pair communication interface
32-bit data bus, 100 mb/s
DMA (direct memory access) mode main memory ram, corresponding CPU operating load <4%
Optional ram backup battery
Fieldbus interface replacement card fi830f/fi820f/fi810f
Fieldbus interface cards are divided into several types according to different protocol standards. Each interface card provides – a fieldbus interface (PROFIBUS,
Can, FF, MODBUS, etc.). The configuration and parameter settings of the interface card itself and the field instrument (or remote i1/0) on the connected fieldbus are still
It is designed by the industrial “unified tool control bui lder without additional software. The interface card can be configured redundantly (separated between each other
Redundant basic unit pm802f) and can be plugged in and out and replaced online.
Fi830f: PROFIBUS DP interface card, as the master station, can connect 126 PROFIBUS DP slave stations, and the communication rate can reach 12mbd
One PS can plug in 4 fieldbus interfaces, connect 496 fieldbus devices, and one city (subsystem) of industrial “system can
Connect 4960 fieldbus devices (10000 i/0).
Fi820f: two serial interfaces are provided to connect the serial protocol equipment. The maximum transmission rate is 38.4kbd and can be configured. Its Standards Association
Modbus Different physical interfaces can be selected for different connection schemes, RS422,
