RV33-1
RV33-1
RV33-1
SINUMERIK802D sl 的调试可按下列步骤进行：
• 系统的连接 – 正确的连接是系统调试顺利进行的基础
• 系统的初始化– 针对机床工艺的初始设定
• PLC 调试 – 首先使安全功能生效（如急停、硬限位等）以及操作功能生效
• 驱动器设定 – 驱动器固件升级、驱动器及电机参数自动配置
• NC 参数设定 – 设置控制参数、机械传动参数、速度参数等
• 数据备份 – 是系统正常使用的保证
在开始调试SINUMERIK802D sl 系统之前，检查到货的SINUMERIK 802Dsl 的硬件，准备调试工具（如个人计算机、电缆等）等工作是非常重要的。
Industrial” CAN I/0 Bus
o
Open CAN -Bus，up to 1 MBd
o
Foundation Fieldbus H1
up to 31. 25KBd
Foundation Fieldbus H2 (fast Ethernet)
HART
The system allows different types of field buses to be mixed and run simultaneously in the same field controller PS.
Industrial “field control explosion (AC800F) consists of the following components:
Basic unit pm802f
Power supply sa801f/sd802f
o
Ethernet network card ei801f/ei802f/ei803f
o
Fieldbus interface card fi810f/fi820f/fi830f
Various accessories
The main components of the field controller PS are described below.
Basic unit pm802f
The basic unit pm802f is composed of a metal rack and a CPU motherboard. It periodically scans the data from the
The signals of the field bus sensors are processed according to the control application program configured by the user, and then the calculation results are passed
The fieldbus interface card returns the corresponding fieldbus actuator.
Two field controllers can realize controller 1:1 redundancy, and undisturbed switching between master and slave PS. Two on each PS
Ethernet network card, the second network card is used to connect the system network diginets), and the second network cards can be interconnected with each other to form a special
Redundant communication link (diginetr) to ensure information synchronization between master and slave PS. — However, the master PS fails, and the slave PS can quickly and undisturbed connect the replacement worker
Make. All inputs and outputs also support redundant operation.
The data communication between the field process controller PS. operating station 0s and the engineer station es is completed by the system network (diginets), which is inserted
The – Ethernet network card on the PS basic unit provides the interface between PS and diginets. ES. Hardware configuration and PS
The user program is downloaded to the
