GE IS200TPROH1BBB
GE IS200TPROH1BBB
GE IS200TPROH1BBB
AS-lnterface (AS-i) — 或者更确切地说，执行器-传感器接口 — 是现场级简单且高效的网络化系统。作为一个开放、非专有的总线系统，它传递着与过程和机器相关的数字和模拟信号。在基本数字式执行器和传感器与上位控制器之间，它还发挥着通用接口的作用。AS-lnterface之所以如此出众，是因为其已将系统高度简单化和实效性并蓄兼收。到目前为止，与其他现场总线系统比较，它是最具价格优势的网络化解决方案。因此，AS-lnterface无愧于成为工业自动化领域中的一个永恒标志。这不仅因为其易于操作且安装便捷，而且也因为其在进行改造时别具灵活性。此外，它极为坚固 — 即便是在最恶劣的环境下表现也同样出色。 SIMOCODE-DP 3UF5(Motor Protection and Control Device with PROFIBUS-DP) 带PROFIBUS-DP接口的电机保护及控制设备。
系统的中央处理单元是微处理器，所有的控制和保护功能都由微处理器执行，包括连锁功能、运行计算、诊断和统计数据、以及自动控制级与电机回路之间的高性能的通讯（PROFIBUS-DP）等。系统里集成了电流互感器，可以检测电流。过流保护、过流报警、电流限制、On/Off返回值检测信号，运行次数和时间的计算等参数都是以电流作为参考值。与传统的电机控制回路相比，SIMOCODE-DP 3UF5大大的简化了电机的控制回路，从而减少了接线，相应地减少了故障点。单独的SIMOCODE-DP系统就可以实现控制和监视功能以及信号处理，不需要增加过载继电器，热敏电阻计算电路，电流互感器，模数转换等等，这些功能的实现完全不需要控制电路接线。起停开关直接接到3UF50基本单元的输入，接触器线圈通过3UF50基本单元的输出控制，不需要互锁的辅助触点。
PLC通过PROFIBUS-DP传送起/停信号，SIMOCODE-DP把起、停、过载故障、过热故障、电流等返回信号传送到PLC。
Communication, which can be installed in the controland PA three levels, DP communication rate can be as high as 12Mb. The CAN (DIN/IS011898 standard) bus
The biggest feature is its super sturdiness and data security. The system of course also supports Modbus. The communication with the intelligent field instrument is through
IART protocol or field bus (31. 25Kb ProfibusPA and FF bus).
The system communication between the operation management level and the process control level is realized by Di giNetS network (Industrial Ethernet/IEEE802.3 standard),
Users can choose the communication transmission medium (ordinary cable or optical fiber) and network topology according to the actual situation of the application.
The popular PC and MS_ Windows 2000 have been widely used in various fields all over the world, becoming the de facto standard computer platform.
tower. The operating station 0S, the engineering station ES and the data gateway GS of the Industrial” system use this platform to ensure the system’s
Versatility, openness and ease of use, and bring great convenience to future technical upgrades and maintenance.
System engineering is very convenient. The configuration language is based on the IE061131 3 industry standard, providing function block diagram (FBD), ladder diagram
(LD), instruction list (IL), sequential function chart (SFC), structured text (ST) and other graphical configuration methods. The system contains about 220 functions
Algorithm library for energy blocks and a basic library with more than 200 graphic symbols and an extended library with a large number of 3D symbols.
The system uses the same set of configuration tool software to complete the configuration and debugging of process level, operation level and even fieldbus instruments, and uses the same
a global database.
The scale of the system is highly scalable, and a single-
