FI830F 3BDH000032R1
FI830F 3BDH000032R1
FI830F 3BDH000032R1
FX2N-5A模拟量特殊功能模块有4路输入通道和1路输出通道。输入通道接收模拟量信号并将其转换成相应的数字值。输出通道获取一个数字值并且输出一个相应的模拟量信号。
1、模拟量信号输入可以选择电压输入或是电流输入。使用PLC主单元提供的TO指令来设定有效的模拟量输入信号。PLC指令用来选择对应每个相应通道的不同的模拟量输入信号的类型。
2、FX2N-5A可以与FX2N，FX2NC，FXIN或是FX0N系列的可编程序控制器连接。
3、两台FX2N-5A单元可以与一台FX0N主单元，FX0N扩展单元，FX1N主单元连接。八台FX2N-5A单元可以与一台FX2N系列PLC连接。四台FX2N-5A单元可以与一台FX2NC系列PLC连接。（要与FX2NC系列PLC连接时，需要使用使用FX2NC-CNV-IF。）
使用FROM/TO指令，通过FX2N-5A的缓冲存储器和PLC之问进行数据转换。
Glossary
Process station:
This term is used to describe AC800F controllers (field controllers) and rack-mounted controllers. A process station can be designed to be redundant
configuration and non-redundant configuration.
AC800F :
This term is used to describe the AC800F Field Controller type of process station. A redundant process station consists of 2
AC800F controller.
Rack mounted process station:
This term is used to describe a rack-mounted type of process station. A redundant process station contains 2 rack-mounted CPUs.
This term is used to describe a single, non-redundant process station.
In the investment of modern automation system, due to the hardware equipment department
It only takes up less cost in the whole system, then write engineering applications
The cost of software becomes increasingly important. Generally speaking, a self
The engineering application software cost of the automation project accounts for about the entire project.
About 50%, it is not difficult to see that the migration of cost structure creates a lot of innovation for users.
Create an opportunity to optimize project investment, therefore, it is necessary to start from engineering programming
Think about lowering costs in the first place!
This is what we developed the Freelance 800F system for:
Keeping hardware prices consistent with those of programmable logic controllers
In this way, cost efficiency can be improved by reducing user engineering costs.
How the Freelance 800F process control system helps users reduce
Low engineering cost?
●By using a complete engineering tool (Control Builder
F) to configure the entire control system, including automation functions
function, operator interface display and logging, and configuration of the fieldbus.
equipment (PROFIBUS, FOUNDATION Fieldbus,
HART, etc.) and device parameter settings.
● Automatic generation of global data between the process control station and the operator station
According to
