HIMA F3417A
t城Eind
IBUE BLD
分組显示
与PS站中组态的模拟功能、控制器、监视功能以及逻辑功能等各种功能块对应的面板可成组显
示和操作，–个分组画面最多含6个面板。另外可在4个块显区显示:进制值。分组显示中最多可
包含6个模拟量和24个数字量过程点的详细信息。
在显示面板上，用彩色棒图这种快速直观的形式来表示模拟量值的大小。为便于更准确的读数，
还同时显示其物理量纲的数字。通过颜色的变换和闪烁可迅速检测出各变量的故障状态。所组态的报
警极限值也能显示出来。从分组显示单元中可直接选择所期望的值，它使得操作员能在过程运行中进
行快速而适当的千预。
分组显示下面的操作行，用以执行对所选过程点的数据写入和操作千预。除操作行外，还可调出
画面选择菜单从菜单上直接调用与所需过程点有关的各类显示画面。
面板显示
采用面板窗口显示技术，可同时获得总体和详细的信息。
controller supports Profibus, FF, ModBus, Can, etc.
International standard fieldbus, Profibus is the most widely used open fieldbus international standard in the world, divided into FMS, DP and PA
Level 3, DP communication rate can be as high as 12Mb. Profibus is used to connect intelligent devices such as distributed I/0 stations and field bus instruments.
Communication between the process station, operator station and engineering station takes place via the system bus DigiNetS (Industrial Ethernet). user
Different transmission media (RJ45 twisted pair, thin, thick or fiber optic cables and mixed media) and network topology can be selected for the system bus.
Simple layout, due to the use of TCP/IP protocol, the system can also use the public telephone network (dial-up mode) or satellite to achieve ultra-long-distance communication.
Subsystems such as PLC communicate with the Industrial” system through the ModBus protocol interface. The system also supports IEC870-5 over-control protocol.
discussion.
The Flash EPROM inside the
