基本特性:
1EE802.3 Ethernet (工业以太网)标准
EI801F提供10BASE2细缆通讯接口
EI802F提供10BASE5粗缆连接(通过AUI接口)
EI803F提供10BASE-T双绞线通讯接口
32位数据总线，100 MB/s
DMA(直接存储访问)方式主存RAM,相应的 CPU操作负荷<4%
可选的RAM后备电池
现场总线换口卡FI830F/FI820F/FI810F
现场总线接口卡按不同的协议标准分为数种，每个接口卡提供-一个现场总线的接口( Profibus,
CAN，FF, ModBus等)。接口卡本身及所连现场总线上的现场仪表(或远程I1/0)的组态和参数设置仍
由Industrial”的统一工具Control Bui lder院成而无需附加软件.接口卡可冗余配置(分置在相互
冗余的基本单元PM802F上)，并可带电插拔、在线更换。
FI830F: Profibus DP接口卡，作为主站可连接126 个Profibus DP从站，通讯速率可达12MBd.
一个PS可插4块现场总线接口,连接496台现场总线设备，Industrial”系统的 一个城(分系统) 可
连4960台现场总线设备(10000 I/0) 。
FI820F:提供2个串行接口，连接串行协议设备，传输速率最高为38.4KBd，可组态。其标准协
议为MODBUS. 不同连接方案，可以选择不同的物理接口，RS422， RS485， RS232, 所有接口为电气隔
离。并且通过2个冗余现场控制器实现冗余操作。
FI8I0F卡是三重化CAN总线协议接口卡(速率1MBd )，用于连接Industr ial”常规过程控制站
PS的I/0护展单元，以便接收来自PS所支持的机架式I/0模件的过程信号。每个现场控制器PS只能配置
-块FI810F卡。- -对冗余PS.上的二个FI810F接口 卡能够冗余切換。
S800、S900是用于过程控制站的分布式I/0，它们通过Prof ibusDP现场总线与其所属的控制器
通信，既可以安装在控制室，也可以安装在现场以尽量接近现场变送器和执行器，从而 节省电缆并
减少安装费用。
S800 1/0及s900 I/0 具有以下优点:
●灵活性:对安装数量没有限制，可小数量安装，也可大量安装，可以安装在室内，也可安装在室
外，可以安装在墙上，也可安装在机柜中。
●模块化:可一步一步扩展，不会因自身限制而影响系统扩展。
●经济性:节省硬件，电缆，从而节省安装及维护费用.
●可靠性:因其自诊断及冗余等特性，可平滑的实现自动切换。
S800/S900型1/0 采用模块化设计，DIN 标准导轨式安装，由于对空间以及环境要求不苛刻，
S800/S900型I/0尤其适用于安装在分散的场合，并且对处理信号几乎没有要求，从而现场仪表和设
备信号可以直接接线到S800/S900 I/0 站。
其它特性: .
●所有模件具备故障自诊断功能并具有LED故障显示
●丰富的I/0模件类型，模拟量I/0精度≤0.1I%
●支持电源冗余
●所有I/0均可设定安全值
●具有短路保护功能
●所有模件 均可带电插拔，并自动识别
●支持冗余 现场总线
●支持HART协议通讯(S900所有I/0模件及部分及部分S800I/O卡件)
●具备本质安全特性(S900所有I/0模件及部分S800模件，BBx ia II C)
●可直接安装在危险区1区(仅S900)
S800 I/0 及S900 I/0采用Profibus DP通信协议。
S800/S900型I/0具有多种模拟及数字输入输出模件，以及热电阻和热电偶模件。所有I/0 模件
均通过了多种恶劣环境及应用领城的测试，证实了它在极其恶劣场合应用下的寿命及可靠性。
Glossary
Process station:
This term is used to describe AC800F controllers (field controllers) and rack-mounted controllers. A process station can be designed to be redundant
configuration and non-redundant configuration.
AC800F :
This term is used to describe the AC800F Field Controller type of process station. A redundant process station consists of 2
AC800F controller.
Rack mounted process station:
This term is used to describe a rack-mounted type of process station. A redundant process station contains 2 rack-mounted CPUs.
This term is used to describe a single, non-redundant process station.
In the investment of modern automation system, due to the hardware equipment department
It only takes up less cost in the whole system, then write engineering applications
The cost of software becomes increasingly important. Generally speaking, a self
The engineering application software cost of the automation project accounts for about the entire project.
About 50%, it is not difficult to see that the migration of cost structure creates a lot of innovation for users.
Create an opportunity to optimize project investment, therefore, it is necessary to start from engineering programming
Think about lowering costs in the first place!
This is what we developed the Freelance 800F system for:
Keeping hardware prices consistent with those of programmable logic controllers
In this way, cost efficiency can be improved by reducing user engineering costs.
How the Freelance 800F process control system helps users reduce
Low engineering cost?
By using a complete engineering tool (Control Builder
F) to configure the entire control system, including automation functions
function, operator interface display and logging, and configuration of the fieldbus.
equipment (PROFIBUS, FOUNDATION Fieldbus,
HART, etc.) and device parameter settings.
Automatic generation of global data between the process control station and the operator station
According to communication.
For field devices, process control stations and operator stations, a unified global database is used for the entire control system, thereby reducing
cost and time investment in establishing data communication and interactive access.
And ensure the consistency of data throughout the system.
Provide system-wide unified inspection of user applications, overriding
from process control stations, operator stations to intelligent field devices, including
Including the integrity and consistency check of the user program.
The programming language strictly complies with the international standard of IEC61131-3, and has
There are high-performance graphics editing functions:
– Function Block Diagram (FBD)
-Ladder Diagram (LD)
– Instruction List (IL)
– Sequence Control Chart (SFC)
. Structured Text (ST)
Extensive function block library, user-defined function blocks can also be added
Added to it, the macro library and graphic symbols can be customized for the user.
Blocks can create graphics and operator panels.
Any standard can be integrated by means of GSD file import
PROFIBUS-DP and PA devices, and through user-defined pairing
dialog box to design the configuration window for these devices.
Profibus field controller can be integrated through FDT/DTM technology
line equipment
system structure
The Freelance 800F process control system is divided into operator levels
and process control level. The
